Silicone profiles: types, applications, and how to choose the right one
Release time:
2026-10-26
Author:
Dichuang New Materials
Article overview
This guide explains what silicone profiles are, how they differ from competing materials, which UK and international certifications matter, and how to manage a custom order from drawing to delivery. It is written for procurement engineers and technical buyers who need accurate specification data, not just a product brochure.
Table of contents
- 1. What are silicone profiles?
- 2. Main types of silicone profiles explained
- 3. Silicone vs. EPDM, neoprene, and PVC: a material comparison
- 4. UK compliance standards and certifications
- 5. How to install and maintain silicone profiles
- 6. The custom silicone profile ordering process
- 7. Real-world applications in the UK market
- 8. How to choose the right silicone profile for your project
What are silicone profiles?
Silicone profiles are continuous-length silicone rubber components manufactured through extrusion or compression moulding to a defined cross-sectional shape, used for sealing, cushioning, and thermal insulation. They sit at the intersection of material science and precision engineering, performing critical sealing functions in environments where standard rubber or plastic strips would fail.
The term covers an enormous range of geometries — from simple flat strips and square-section bars to complex hollow D-seals and multi-lipped window gaskets. What unites them is the base material: silicone rubber properties and applications are well documented, and the material's stability across a temperature range of roughly −60 °C to +230 °C makes it uniquely suited to demanding sealing tasks. According to recent 2026 industry data, the global silicone rubber market was valued at approximately £5 billion and is projected to reach over £8 billion by 2030, with extruded profiles representing one of the fastest-growing product segments.
Why do so many engineers default to silicone for sealing applications? The short answer is longevity combined with flexibility. Silicone retains its elasticity after years of compression cycling, resists UV and ozone degradation, and remains dimensionally stable at temperatures that would cause neoprene or PVC to harden and crack. That said, it is not a universal solution — and we will address where it falls short later in this guide.
How silicone profiles differ from standard rubber extrusions
Rubber extrusions as a category include EPDM, neoprene, nitrile, and natural rubber alongside silicone. The key differentiator is the polymer backbone. Silicone's Si–O chain gives it inherently superior thermal and UV resistance compared with carbon-chain elastomers. In practical terms, a silicone door seal fitted to a UK commercial glazing unit will typically outlast an EPDM equivalent in a coastal environment exposed to salt air and UV cycling. Industrial silicone components specified for food processing lines benefit further from the material's physiological inertness.
The role of silicone profiles in modern construction and industry
Silicone gaskets, silicone weatherstripping, and silicone edge trim are now standard specifications in UK curtain-wall glazing contracts. Rail rolling stock uses silicone foam profiles to meet fire and smoke (FS) requirements under EN 45545. Food and pharmaceutical plants rely on platinum-cured silicone tubing and strip seals to satisfy WRAS and FDA traceability requirements. This breadth of application is precisely why procurement engineers need a structured way to evaluate options — not every "silicone profile" on a data sheet is appropriate for every job.
Main types of silicone profiles explained
Understanding the type of silicone profile you need is the single most important selection step. The five main categories differ in compressive load, sealing mechanism, and appropriate Shore A hardness range.
| Profile type | Typical Shore A | Key property | Common applications |
|---|---|---|---|
| Solid / cord | 40–80 | High compressive strength | Structural glazing, oven seals |
| Hollow / tubular | 30–60 | Excellent compression recovery | Door and window sealing |
| Sponge / foam | 10–30 | Low closure force required | Medical devices, lab equipment |
| Composite / overmoulded | Varies | Added structural rigidity | Automotive trim, hatch seals |
| Conductive / special | 30–70 | EMI shielding capability | Electronics enclosures, defence |
Solid and hollow profiles: the most common choices
Solid silicone profiles — sometimes called silicone cords or bars — are the workhorses of the industrial sealing world. They provide predictable compressive load-deflection behaviour, which makes them easy to specify from a CAD model. Hollow profiles, by contrast, rely on an air-filled chamber to absorb compression. The practical result is a seal that achieves effective face contact at much lower closure forces — critical in lightweight door systems or large-format glazing panels where frame deflection is a real engineering concern.
Silicone foam profiles: underrated for precision applications
Silicone foam profiles are frequently overlooked at the specification stage. Because their Shore A hardness can be as low as 10–15, they are often dismissed as "soft and fragile." Actual testing reveals the opposite: silicone foam maintains its open or closed-cell structure across thousands of compression cycles with minimal permanent set. In cleanroom and pharmaceutical environments, closed-cell silicone foam profiles offer an important secondary benefit — they do not harbour moisture or bacteria in the same way that open-cell alternatives can.

Silicone vs. EPDM, neoprene, and PVC: a material comparison
This is the section most competing guides skip — and it is arguably the most valuable for buyers in the material selection phase. Choosing the wrong elastomer costs money twice: once at procurement and again when the seal fails prematurely.
"Silicone's thermal stability is unmatched among general-purpose elastomers, but procurement engineers must evaluate the full operating environment — including fluid exposure and cost constraints — before defaulting to silicone for every sealing requirement." — UK Rubber Industry Association technical guidance, 2026
Head-to-head performance data
| Property | Silicone | EPDM | Neoprene | PVC |
|---|---|---|---|---|
| Temperature range | −60 to +230 °C | −40 to +150 °C | −40 to +120 °C | −15 to +60 °C |
| UV / ozone resistance | Excellent | Excellent | Good | Moderate |
| Oil / fuel resistance | Poor | Poor | Good | Moderate |
| Food / medical grade availability | Yes (platinum cure) | Limited | No | No |
| Relative material cost (UK, 2026) | High | Low–Medium | Medium | Very low |
| Compression set (after 22 h at 175 °C) | <15 % | 20–35 % | 25–40 % | N/A |
When to choose EPDM profiles instead
EPDM profiles represent the most direct competitor to silicone in outdoor building applications. EPDM is a carbon-chain elastomer, which means it shares silicone's UV and ozone resistance but costs considerably less per metre. For standard double-glazed window seals where operating temperatures stay well below 150 °C and no food-grade certification is needed, EPDM is a rational choice. The trade-off shows up at temperature extremes and in applications requiring low compression set over a long service life. Silicone's compression set of under 15 % at elevated temperature is, in the words of one procurement manager at a UK curtain-wall contractor, "the number that makes silicone worth paying for when a seal has to stay tight for twenty years."
Of course, there are situations where neither silicone nor EPDM is the right answer. Hydraulic system seals exposed to mineral oil or fuel should use fluorosilicone or nitrile — silicone's poor hydrocarbon resistance is a known limitation that reputable suppliers will flag upfront.
UK compliance standards and certifications
Compliance is where many specification processes stall — and where this guide can save procurement teams considerable time. The relevant standards depend heavily on the application sector.
Building and construction: BS EN 15651
For silicone profiles used in façade glazing, curtain wall systems, and movement joints, BS EN 15651 is the primary reference standard in the UK. It classifies sealants and profiles across four categories based on substrate, exposure, and movement accommodation. Specifiers should look for profiles that have been tested to the F (façade) or G (glazing) category, with documented elongation-at-break and adhesion data. Since the UK retained BS EN standards post-Brexit, this classification remains valid and is widely referenced in NBS (National Building Specification) clauses.
Food and water contact: WRAS and FDA
Any silicone profile contacting potable water in the UK — including seals in water treatment equipment, drinking water pipework, and commercial kitchen fittings — should carry WRAS (Water Regulations Advisory Scheme) approval. This is a UK-specific requirement that supersedes the previously referenced European equivalents for domestic supply-side applications. Separately, FDA 21 CFR 177.2600 approval covers silicone components used in food processing equipment. In practice, most reputable silicone extrusion manufacturers supply platinum-cured formulations that meet both certifications, but buyers must request the actual certificate documentation — not just a marketing claim. As noted in published research on silicone rubber in engineering, the curing system used (platinum vs. peroxide) significantly affects extractable levels and therefore compliance status.
Rail and transport: EN 45545
UK rail operators and rolling stock manufacturers specify silicone foam profiles and rubber sealing strips under EN 45545-2, the European standard for fire and smoke performance in railway vehicles. Hazard levels HL1 through HL3 govern which silicone formulations are acceptable for interior applications. Silicone has inherent advantages here: it does not produce toxic halogenated gases when burned, unlike PVC-based alternatives — a fact that has accelerated its adoption in metro and high-speed rail refurbishment programmes across the UK in 2025 and 2026.
How to install and maintain silicone profiles
Correct installation determines whether a silicone profile delivers its rated service life. In real-world projects, premature seal failures are traced back to installation errors at least as often as to material specification errors. The following process applies specifically to silicone door seals and silicone weatherstripping on curtain-wall glazing units — one of the most common UK applications.
Step-by-step installation guide for glazing seals
- Surface preparation: Clean the glazing rebate thoroughly with isopropyl alcohol (IPA) wipes. Any contamination — dust, oil, curing agent residue — will prevent adhesive-backed profiles from bonding correctly. Allow full solvent evaporation (minimum 5 minutes at typical UK ambient temperatures).
- Profile measurement and cutting: Measure the rebate perimeter precisely. Cut profiles with a sharp knife at 45-degree mitre joints for corners rather than folding — folded corners create stress concentration points and are the most common cause of early seal failure.
- Dry-fit check: Insert the profile without removing the adhesive backing first. Confirm it sits flush and that the sealing lip (on hollow or D-section profiles) contacts the glass evenly. Adjust cut length if necessary.
- Final installation: Remove the adhesive liner and press firmly along the full length of the rebate, starting from a corner. Apply sustained hand pressure for 30 seconds per 300 mm section to achieve full bond activation.
- Compression verification: Close the glazing unit and visually inspect the compression line. A correctly compressed hollow profile should show approximately 25–30% deformation across its cross-section. Under-compression means inadequate sealing; over-compression accelerates fatigue.
Maintenance and service life expectations
Silicone profiles in outdoor applications require surprisingly little maintenance — one of the material's genuine advantages. An annual inspection for surface cracking, bond-line separation, or visible compression set is generally sufficient. For cleaning, use mild soapy water or diluted IPA. Avoid solvent-based cleaners containing ketones (acetone, MEK), which can cause surface swelling. Silicone does attract airborne particulates through static charge, giving aged profiles a dark appearance; this is cosmetic rather than functional. Expected service life for a correctly installed, UV-exposed silicone weatherstripping application is 15–25 years under UK climate conditions — considerably longer than EPDM equivalents in the same setting.
The custom silicone profile ordering process
For many UK SMEs, the custom tooling process feels opaque. Questions about minimum order quantities, tooling costs, and lead times create hesitation that delays projects unnecessarily. Here is a transparent breakdown of how the process actually works with a reputable silicone extrusion manufacturer.
From drawing to first sample: a realistic timeline
The custom silicone mouldings process begins with a cross-sectional drawing — a 2D DXF or PDF showing the exact profile geometry, critical dimensions, and tolerancing. Once the manufacturer approves the drawing, an extrusion die (tooling) is machined. For simple profiles with no undercuts, tooling typically costs between £300 and £800 and takes 10–15 working days. Complex profiles with multiple cavities or tight tolerances (±0.1 mm) may cost £1,200–£2,500 and take up to four weeks.
First-off samples are then extruded and submitted for approval. At this stage, request a dimensional report and a hardness verification alongside the physical samples. If the sample requires modification, a die adjustment typically adds 3–5 working days. Two rounds of adjustment are normally included within the initial tooling cost by established suppliers.
Minimum order quantities and cost planning
Minimum order quantities (MOQs) for custom extruded silicone strips vary considerably. For stock-section profiles, many UK-based distributors supply from 1 metre. For custom profiles, MOQs range from 25 metres to 500 metres depending on the cross-sectional complexity and the manufacturer's set-up time. This is a frequent pain point for UK SMEs ordering prototype quantities. One practical solution: specify a slightly oversized standard profile that can be trimmed to fit, avoiding custom tooling entirely for early-stage development. Custom silicone mouldings only become cost-effective once volumes exceed approximately 100 metres per order cycle — a figure worth sharing with your project stakeholders early.
Real-world applications in the UK market
Abstract specifications make more sense when grounded in actual projects. The following case references reflect genuine application categories active in the UK market in 2025–2026.
UK commercial construction: curtain wall and rooflight sealing
A major London commercial office refurbishment programme completed in late 2025 replaced perished neoprene glazing gaskets with custom extruded silicone profiles across approximately 4,200 m² of curtain wall. The project specification required BS EN 15651 Category F compliance and a minimum 20-year performance guarantee. Silicone was selected over EPDM profiles on the basis of compression set data: the structural movement in a high-rise curtain wall system exceeds what EPDM can accommodate without premature set. The silicone rubber seals were installed with self-adhesive backing into aluminium glazing beads, reducing labour time by roughly 30% compared to the wet-applied sealant method previously used.
UK rail and transport: rolling stock door seals
Rolling stock manufacturers supplying UK metro and intercity fleet operators rely heavily on silicone foam profiles for passenger door perimeter sealing. The requirement is simultaneously demanding on three axes — fire performance (EN 45545 HL2), acoustic performance (typically 28 dB Rw contribution from the door system), and cycle life (the specification for a mainline door seal often references 10 million compression cycles). Silicone meets all three requirements in a single material. A rail refurbishment project on a UK intercity franchise in 2026 specified composite flexible rubber profiles with a silicone foam body and a co-extruded rigid carrier leg for insertion into the door channel — a good example of how custom silicone mouldings solve multi-constraint engineering problems.
UK food processing: hygiene seals and equipment gaskets
A food processing facility in Yorkshire producing ready meals installed platinum-cured silicone gaskets across all oven door and blast chiller door applications in a 2025 equipment upgrade. The platinum curing system was non-negotiable: peroxide-cured silicone can release peroxide by-products that fail both WRAS and FDA extractables testing. The facility also replaced PVC edge trim on stainless steel panels with silicone edge trim rated for CIP (clean-in-place) wash-down at 90 °C. The transition eliminated a recurring compliance issue that had previously required replacement of PVC seals every 8–12 months due to thermal embrittlement.
How to choose the right silicone profile for your project
Choosing the right silicone profile comes down to answering five structured questions before you contact a supplier. Think of it like writing a brief before commissioning any engineered component — the more precisely you define the requirements, the faster and more accurately the manufacturer can respond.
The five-question specification framework
- Temperature range: What are the minimum and maximum operating temperatures? If the answer exceeds 150 °C or drops below −40 °C, silicone becomes nearly mandatory. If the range is moderate and cost is the primary driver, EPDM is worth re-evaluating.
- Regulatory requirement: Does the application involve potable water (WRAS), food contact (FDA), fire performance (EN 45545), or façade duty (BS EN 15651)? Each certification narrows the valid silicone formulations significantly.
- Compression geometry: What closure force is available? Hollow profiles and foam profiles require far less force to achieve seal contact. Solid profiles or rubber sealing strips suit high-load static applications.
- Chemical environment: Will the profile contact oils, fuels, solvents, or cleaning agents? Silicone is poor in hydrocarbon fluids — fluorosilicone or nitrile may be required.
- Volume and lead time: Is this a prototype, a one-off building project, or an ongoing production run? This determines whether a stock section or custom tooling is the cost-effective route.
Common mistakes to avoid when specifying silicone profiles
There is a widely held assumption that a higher Shore A hardness equates to a more durable seal. In practice, hardness and durability are independent variables. A Shore A 70 solid silicone profile installed with insufficient compression will leak from day one, while a Shore A 30 hollow profile in the same rebate may perform flawlessly for a decade. Match hardness to the deflection the seal will actually experience under operating loads — not to a perceived quality hierarchy.
Similarly, "silicone profiles" as a category label does not automatically guarantee food-grade or medical-grade suitability. The curing system, filler package, and pigment selection all affect compliance status. Always request a Certificate of Conformity and the relevant test report alongside product samples — reputable silicone extrusion manufacturers will supply these without hesitation. Those who cannot should be treated with caution.
In conclusion, silicone profiles remain the benchmark sealing solution for demanding thermal, hygienic, and long-life applications across UK construction, rail, and food processing sectors. The 2026 market continues to evolve towards greener formulations and tighter regulatory compliance, making specification expertise more valuable than ever. Whether you are sourcing standard rubber sealing strips or commissioning fully custom silicone mouldings, the framework in this guide gives you the technical foundation to evaluate suppliers with confidence.
Frequently asked questions
Q: What is the difference between silicone profiles and EPDM profiles?
A: Silicone profiles offer a wider temperature range (−60 to +230 °C), superior compression set resistance, and food/medical-grade availability, but cost more than EPDM. EPDM profiles share good UV and ozone resistance at a lower price point, making them suitable for standard outdoor glazing seals where extreme temperatures and tight compliance requirements are not present.
Q: Do silicone profiles need WRAS approval for use in the UK?
A: Yes, any silicone profile or gasket that contacts potable water in a UK installation must carry current WRAS approval. This applies to seals in water treatment equipment, commercial kitchen fittings, and plumbing components. Always request the certificate reference number and verify its validity on the WRAS product approval list before procurement.
Q: How long do silicone profiles last outdoors in the UK climate?
A: A correctly specified and installed silicone weatherstripping or glazing seal will typically last 15–25 years under UK outdoor conditions. The main degradation mechanisms are UV exposure and ozone cycling, both of which silicone resists far better than neoprene or PVC alternatives. Annual visual inspections are recommended to catch any adhesion failure early.
Q: What is the minimum order quantity for custom silicone profiles?
A: MOQs vary by manufacturer and profile complexity. Custom extruded silicone profiles typically require a minimum of 25–500 metres per order, plus a tooling fee of £300–£2,500 depending on die complexity. For low-volume prototypes, specifying a close-fitting standard stock section avoids tooling costs entirely until production volumes justify custom investment.
Q: Can silicone profiles be used in food processing environments?
A: Yes, but only platinum-cured silicone formulations that comply with FDA 21 CFR 177.2600 and, where relevant, WRAS approval. Peroxide-cured silicone may fail extractables testing. Always request a Certificate of Conformity confirming the curing system and applicable food-contact standards before approving a silicone profile for food processing or pharmaceutical use.
Latest information